Use | : | Heat-resistant and temperature regulator hoses |
---|---|---|
Fluid | : | Water (Non-drinkable), Powders, Oils (Animal and Vegetables), Chemicals, Air |
Function | : |
|
Certifications | : | RoHS2 Compliant |
Method | : | Primary Material: Silicon Materials: Polyester thread Diameter: 6.3mm~25.4mm Temperature Range: -30℃ ~120℃ Steam(under 120℃ for a short time) Oils (Animal and Vegetable)(under 70℃) |
TOYOSILICONE THERMO
TOYOSILICONE THERMO Hose is a heat resistant hose for pressure feed made of silicone rubber.
It boasts high heat resistance and can be used for high-temperature fluids up to 120℃ and hot water below 100℃. It is used for various heat resistant applications including piping for temperature controllers for hot water.
TOYOSILICONE THERMO Hose has a special structure that prevents hose rupture and disconnection when using high-temperature fluids, and does not easily harden and has a longer life compared to PVC and rubber hoses, thus improving safety and productivity.*It is not for use with food products.
In addition to hoses, various dedicated couplings are available for higher safety and productivity.
Important
Warning
(1) Under no circumstances should these hoses be used for nonpolar organic solvents (such as benzene, toluene and hexane), halogenated hydrocarbons (such as methylene chloride or trichloroethane), concentrated strong acids, strong bases, mineral oil or steam. Also, do not use for animal or vegetable oil at temperatures exceeding 70℃. For steam cleaning, apply for a short time with a saturated steam pressure of less than 0.2 MPa at 120℃.
(2) Do not use for high temperature water at exceeding 100℃. Due to weakened reinforcement (thread), it can cause a hose puncture and secondary damage such as injury and burn.
Description
Use | : | Heat-resistant and temperature regulator hoses |
---|---|---|
Fluid | : | Water (Non-drinkable), Powders, Oils (Animal and Vegetables), Chemicals, Air |
Function | : |
|
Certifications | : | RoHS2 Compliant |
Method | : | Primary Material: Silicon Materials: Polyester thread Diameter: 6.3mm~25.4mm Temperature Range: -30℃ ~120℃ Steam(under 120℃ for a short time) Oils (Animal and Vegetable)(under 70℃) |
Additional documents
Guidance
Fluids (Hoses) | Air, Powders, Water (non-drinkable) |
---|---|
Method | Pressure |
Functionality | Flexible, Heat Resistant, Transparent |
Material | Silicon Rubber |
Highest Temperature | 120 |
Lowest Temperature | -30 |
Fluids (Hoses) | Air, Powders, Water (non-drinkable) |
---|---|
Method | Pressure |
Functionality | Flexible, Heat Resistant, Transparent |
Material | Silicon Rubber |
Highest Temperature | 120 |
Lowest Temperature | -30 |
Guidance
Feature:
-
Advantage 1
- Can be used for high-temperature fluids up to 120℃ and hot water below 100℃. Suitable for piping of temperature controllers, etc.
- Can be used as flexible transport hose even at -30℃
-
Advantage 2
- With a long use life, reduces production problems due to hose hardening and deterioration caused by heat. Dedicated fastening couplings 3 meters in length are also available for temperature regulators.
- Highly transparent and provides security in fluid verification.
- Has good pressure-resistant performance due to its special thread cast-off prevention structure, can prevent trouble around couplings and promotes safety and security.
-
Complies with various laws and regulations for safety and security
- Safe and secure due to its compliance with RoHS2 regulations
-
Dedicated couplings provide improved productivity and safety
- Various dedicated couplings are easy to install and prevent fluid leakage and hose disconnection for safety and reassurance
Standards Chart by Size
Temperature Range -30℃ ~ 120℃
Product Code | Inner dia. x Outer dia. (mm) |
Use pressure (MPa) |
Standard weight (kg/roll) |
Standard length (m) |
Minimum bend radius (mm) |
---|---|---|---|---|---|
TSITH-6 | 6.3×12.3 | 0~1.0 | 4.6 | 40 | 80 |
TSITH-9 | 9.5×16 | 0~1.0 | 6.4 | 40 | 100 |
TSITH-12 | 12.7×19.5 | 0~0.5 | 4.1 | 20 | 130 |
TSITH-15 | 15.9×24 | 0~0.5 | 6.2 | 20 | 150 |
TSITH-19 | 19×28 | 0~0.5 | 8.2 | 20 | 180 |
TSITH-25 | 25.4×35.5 | 0~0.5 | 11.8 | 20 | 220 |
Packaging: Boxed
Coloring: Milky orange line added
Genuine Couplings : 21 | Coupling Name | TOYOCONNECTOR | |
---|---|---|---|
Hose Size | Hose Connection | Cap Nut | |
Coupling Specification | Male Thread | ||
Primary Material | SUS | ||
Product no. | TCSB | ||
Certification | RoHS2 Certified | ||
Hoses Product Code | Inner dia. (mm) | Outer dia. (mm) |
|
FF-9-20 | 9 | 15 | ◯ |
FF-12-20 | 12 | 18 | ◯ |
FF-15-20 | 15 | 22 | ◯ |
Related products
-
General Fitting
TTT FITTING BRASS
-
Toyoconnector for General Usage
TCSBS
-
Toyoconnector for General Usage
TC3-SS
-
Dust Cap/Plug (KAMLOK)
KAMLOK ADAPTER Hose Shank 633-ET AL
-
Dust Cap/Plug (KAMLOK)
KAMLOK ADAPTER Hose Shank 633-ET SST
-
Dust Cap/Plug (KAMLOK)
KAMLOK ADAPTER Hose Shank 633-E AL
-
Dust Cap/Plug (KAMLOK)
KAMLOK ADAPTER Hose Shank 633-E SST
-
Dust Cap/Plug (KAMLOK)
KAMLOK ADAPTER Hose Shank 633-E PP
-
Dust Cap/Plug (KAMLOK)
KAMLOK COUPLER Hose Shank 633-C AL
-
Dust Cap/Plug (KAMLOK)
KAMLOK COUPLER Hose Shank 633-C SST
-
Dust Cap/Plug (KAMLOK)
KAMLOK COUPLER Hose Shank 633-C PP
-
Dust Cap/Plug (KAMLOK)
KAMLOK TWINLOK TYPE COUPLER 633-CL AL
-
Dust Cap/Plug (KAMLOK)
KAMLOK TWINLOK TYPE COUPLER 633-CL SST
-
Dust Cap/Plug (KAMLOK)
KAMLOK TWINLOK TYPE COUPLER 633-CL PP
-
Dust Cap/Plug (KAMLOK)
Kamlok 633-CT AL
-
Dust Cap/Plug (KAMLOK)
KAMLOK COUPLER Hose Shank 633-CT SST
-
General Fitting
TTT Black Clamp – Higher Rust Resistance
-
General Fitting
Safety TYPE SB
-
General Fitting
Safety TYPE FS